Video; Video Settings - Lorex LNC254 series User Manual

15 Configuring Camera Settings Using a Browser
1. Perform one of the following:
• To Scan available WiFi networks, click WiFi Scan.
• To connect to a hidden WiFi network, select Enable Wifi function, and manually fill
out the SSID, Security mode (i.e. encryption type), and the WEP or WPA-PSK Key.
Click Save & Apply. Refresh the page and select WiFi test. When the test is suc-
cessful, disconnect the camera from Ethernet.
• To configure a fixed IP address for the camera when connected over WiFi, click IP
address, configure the settings as needed, and click Save & Apply.
• To test configured WiFi settings, click WiFi test.

15.3 Video

Configure camera video and streaming settings.

15.3.1 Video Settings

Adjust the video quality settings. Set the password to access camera video through L-View
or apps.
To set the camera password for accessing video through L-View or apps:
1. Under Password (play video), enter a password to access the camera video using L-
View or smart phone and tablet apps.
2. Click Save & Apply to save the new password.
#LX400072; r.28402/28402; en-US
128