Enabling Speaker Alarms - Lorex LNC254 series User Manual

14 Android™ App
5. Under Motion sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be trig-
gered if a moving object is larger than 1% of the video area. If it is set to 10, a moving
object must be larger than 10% of the video area to trigger motion detection.
6. Select from the following trigger options for email alarms:
• Scheduling: Send email alarms based on the settings configured under Schedule.
• Motion: Use Video motion detection to trigger email alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
7. Enter up to 3 email addresses under Recipient1~3 that will receive email alarms.
8. Tap Update to save your changes.
NOTE
If you want to use a custom SMTP server to send Email messages, click SMTP Settings, enter your
SMTP server information, and tap OK.

14.4.11 Enabling Speaker Alarms

Configure the siren. The siren can be set up to go off when the camera detects motion.
This is helpful if you want to scare off intruders.
To configure speaker alarms:
1. In Camera List, tap next to the camera you would like to edit.
2. Tap Camera Settings.
3. Tap Schedule then Speaker Alarm.
4. Under Speaker Alarm Trigger, tap to select ON to enable speaker alarms or OFF to
disable.
5. Under Alarm Loop Times, select the number of times you would like the speaker
alarm to repeat when alarms occur.
6. Select from the following speaker alarm triggers:
• Scheduling: Create audio alarms based on the settings set in the Schedule.
• Motion: Use Video motion detection to trigger audio alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
7. Tap Alarm Test to sound a test alarm.
8. Tap Update to save your settings.
#LX400072; r.28402/28402; en-US
120