Editing Camera Wifi Network Settings - Lorex LNC201 User Manual

iPhone® App
2. Tap Camera Settings.
3. Tap Network then Wired Network.
4. Select DHCP (recommended) to allow the camera to automatically obtain an IP
address from the router or Static to use fixed IP address settings. If you select Static,
configure your IP Address, Subnet mask, Default gateway, DNS1, and DNS2.
5. Tap Update to save your settings.

5.4.10 EDITING CAMERA WIFI NETWORK SETTINGS

Configure WiFi network settings for the camera.
To edit camera WiFi settings:
1. In Camera List, tap
2. Tap Camera Settings.
3. Tap Network then WiFi Network.
4. Slide WiFi to ON to enable WiFi on the camera and scan for available networks.
5. Tap a WiFi network and enter the password to connect.
94
Select DHCP or Static
If Static, configure IP
address information
next to the camera you would like to edit.