Lorex LNC254 series User Manual page 22

6 Connecting to Your Camera on iPad®
5.2. Under ID, press the QR code button (
the back of the camera using the camera on the iPad. The CamID will automati-
cally be entered.
• OR: Manually enter the CamID printed on the camera.
NOTE
QR code setup is not compatible with the 1st generation iPad®. If you have a 1st generation
iPad®, manually enter the CamID printed on the camera into ID.
5.3. Under Password, enter the camera password. If this is the first time connecting
to the camera, enter lorex. Press Done.
6. Tap the name of the camera in the Camera List to connect to the camera. Lorex Ping
connects to the camera.
7. If this is the first time connecting to the camera, you will be prompted to create your
own password. Tap OK.
8. Under New password, enter a new password for the camera and repeat the password
under Confirm password. Tap Done.
9. Tap the name of the camera in Camera List again to connect to the camera. For details
on using the iPad app, see 13 iPad® App, page 91.
#LX400072; r.28402/28402; en-US
) and line up the QR code printed on
14