Enabling Email Notifications - Lorex LNC254 series User Manual

13 iPad® App
5. Tap a WiFi network and enter the password to connect.
• To connect to a hidden WiFi network, tap Other. Enter the SSID and select the se-
curity type and tap Done. Tap the network name from the list and enter the
password.
6. Wait for the update to complete.
7. Remove the Ethernet cable from the camera. It will connect to the WiFi network. When
it is connected, the blue Network LED will be on or flashing.
8. Tap next to the camera to exit the edit camera screen.
9. Tap the camera in the Camera List to connect. If you cannot connect, check to make
sure you have entered the correct wireless password and that the camera is in signal
range of your wireless router.

13.4.10 Enabling Email Notifications

Configure email alarms. The camera can be set up to send email alerts when motion is de-
tected. Email alarms include a .jpg attachment.
To enable email notifications:
1. In Camera List, tap
2. Tap Camera Settings.
3. Tap Schedule then Email Alarm.
4. Under Email trigger, select ON to enable email notifications or OFF to disable.
5. Under Motion sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be trig-
gered if a moving object is larger than 1% of the video area. If it is set to 10, a moving
object must be larger than 10% of the video area to trigger motion detection. Tap
Email alarm to return to the Email Alarm menu.
#LX400072; r.28402/28402; en-US
next to the camera.
101