Table of Contents
Advertisement
10
L-View for PC
10.7.2 Video Tab (Configure General Video Settings)
The Video tab allows you to configure general video settings, such as color and brightness
settings.
To configure general video settings:
1. Under Video Color, select Color or Black & White.
2. Under Sharpness, select the sharpness of the image between 10 (highest) and 1
(lowest).
3. Under Place, select Outdoor video if the area with the camera is brightly lit. Select In-
door Video if you notice strip lines in the image or if the picture is too dark on the Out-
door video setting. Select Indoor video + Sunlight if the picture is too bright on the
Indoor Video setting.
NOTE
If you select Indoor Video or Indoor Video + Sunlight, select 60Hz or 50Hz to adjust the camera
for the frequency of your indoor lighting.
Under Video Flip, select Video Flip to flip the camera image vertically and horizontally
or select Normal for normal orientation.
4. Under Brightness, select the brightness of the image between 10 (highest) and
1 (lowest).
5. Under Low Light Sensitivity, set the camera's sensitivity in low light environments be-
tween Very High (highest), High, and Normal (lowest).
6. Check Enable time display on video to turn on video time stamps or un-check it to
disable video time stamps.
7. Under Microphone, select Enabled to enable the built-in microphone on the camera
or select Disabled to disable the built-in microphone on the camera.
8. Click Update to save changes. Enter the camera admin user name (default: admin)
and password (default: left blank) and click OK. The camera will disconnect. Wait
about 15 seconds and then double-click the camera in Camera List or Auto Search to
reconnect to the camera.
#LX400072; r.28402/28402; en-US
47
Advertisement
Table of Contents
