Pc Wifi Setup - Lorex LNC254 series User Manual

8 Connecting to Your Camera on PC
5. If you have connected to this camera before, L-View connects to the camera. If this is
the first time connecting to the camera, L-View will prompt you to create your own
password for the camera. Click OK.
6. Under New Password, enter a password that will be used for the camera. Under Con-
firm Password, enter the password again. Click OK.
7. Double-click the camera again under Camera List to connect. For detailed instructions
on using L-View, see 10 L-View for PC, page 33.

8.2 PC WiFi Setup

The camera must be connected to your router using an Ethernet cable before you can set
it up to use WiFi.
1. Install L-View on a PC in your local network (must be connected to the same router as
the camera) and connect to the camera.
2. Right-click on the camera ID in the Auto Search area and click Web Configure.
3. Enter the camera admin user name and password. By default, the admin user name is
admin and the admin password field is left blank. Click Log in. The Web Configure
interface opens in your default web browser.
NOTE
Your camera admin user name and password differs from the password used to connect to your cam-
era to view video.
4. Click on Network and then WiFi Security.
#LX400072; r.28402/28402; en-US
25