Auto Scanning; Selectable Dwell Settings - Lorex SG6227 Instruction Manual

AUTO SCANNING

This video security system provides you with the option to automatically
switch between the four camera locations. If you have fewer than four
cameras, you can also set the system to scan between three or two
locations.
Setting Auto Scan to 2 or 3 camera locations:
1. Press and hold the Auto button for more than 2 seconds. All four LED
lights on the front of the monitor will turn ON.
2. Continue to press and hold the Auto button. The Channel 4 LED will
turn off. The system is now set to scan between three camera
locations (Channel 1-3).
3. Continue to press and hold the Auto button. The Channel 3 LED will
now be turned off. The system is now set to scan between two camera
locations (Channel 1-2).
4. Continue to press and hold the Auto button to return to the four camera
viewing option (all four LED lights will be illuminated).

SELECTABLE DWELL SETTINGS

Dwell Setting is the time duration between each camera view in the auto
sequence mode.
This system provides you with the option of three selectable dwell times (2,
5 and 10 seconds) when set to Auto Mode. This system is preset to a two
second interval.
Changing Dwell Time:
1. Press and hold the Channel Select button. The LED light will turn on to
indicate that it is set to 2 seconds.
2. Continue to press and hold the Channel Select button. The LED light will
flash one second interval to indicate that it is now set to the 5 second
interval.
3. Continue to press and hold the Channel Select button.
4. The LED light will flash three second interval to indicate it is set to the 10
second interval.
7