Viewing Modes; Auto Sequence Viewing Mode - Lorex LW1741 User Manual

8 Using the System
• Press to open the Main Menu.
• Press the
• Press to open sub-menus and confirm menu selections.
• Press to save changes and exit menus.

8.3 Viewing Modes

There are 3 different viewing modes available on the system: Single Channel Viewing
mode, Auto Sequence Viewing mode (view individual channels automatically in se-
quence), and Quad Viewing mode (view all 4 channels at once in split-screen).
To change viewing modes:
• Press / to select between channels 1–4 in single channel view, as well as to en-
able Quad Viewing and Auto Sequence Viewing modes.

8.3.1 Auto Sequence Viewing Mode

Auto Sequence Viewing mode cycles through connected channels in full-screen.
Auto Sequence Example
To enable Auto Sequence Viewing:
• Press / until a single channel is shown on screen with the Auto Sequence icon (
) at the top of the display. The receiver automatically switches through con-
nected channels.
• To return to single channel viewing, press
) appears at the top of the display.
#LX400030; r.16602/16610; en-US
keys to move the cursor left, right, up, and down.
/ until the Single Channel icon (
17