Configuring Night Mode Settings - Lorex LNC216 SERIES Instruction Manual

L-View for Mac

5.6.5 CONFIGURING NIGHT MODE SETTINGS

Configure when the camera uses day or night mode. When day mode is on, the camera
sees in color. When night mode is on, the camera sees in black and white, and the
Infrared LED turns on to enable night vision.
To configure night mode settings:
1. Right-click on the camera you want to configure in Camera List and select Night
mode control.
2. Select one of the following:
• Auto: Camera will automatically switch between day mode or night mode, based on
the amount of light in the room.
• Scheduled time of night mode: Camera will switch between day mode and night
mode at a scheduled time each day. If using this option, use the first set of drop-down
menus to select (in 24-hour time) the time the camera will switch to night mode and
the second set of drop-down menus to select when the camera will return to day
mode.
94
EXAMPLE
Start of night mode
(8:00 PM)
Return to day mode
(8:00 AM)