Inter-Tel 8560 User Manual page 73

To store a number in a Speed-Dial location:
With the handset in the cradle, dial
1.
Dial the speed-dial location (0-9) you want to program.
2.
Enter the desired name for the speed-dial number, as described below:
3.
• Alphanumeric mode (Message button and lamp lit): Press the dialpad buttons
to enter the desired characters. (Refer to the chart on
of times a button is pressed determines which character is entered. For exam-
ple, 533266 would enter "JEAN." When adjoining characters are located
under the same button, press
For example, 66
correspond to the letters printed on dialpad buttons 2-9.) Press
to leave a space. Press
• Press the
Dial the extension number or telephone number to be stored, as described below:
4.
• Numeric mode (Message button and lamp unlit): Enter the number.
NOTE:
includes an asterisk, pound, hookflash, or pause, use the menu buttons to
enter the special character.
• Press the
NOTE:
enter the Outgoing Call access code (default is
number.
To erase a Station Speed-Dial name and/or number:
With the handset in the cradle, dial
1.
Dial the desired location code (0-9) or press the desired Station Speed-Dial but-
2.
ton.
Press
3.
Press
4.
Press
5.
Press
6.
®
Inter-Tel Model 8560/8660 User Guide
6667776 would enter "NORM." (Note that letters
FWD
MUTE
menu button to save the name.
ACCEPT
You cannot use hyphens or colons in the number. If your number
menu button on the display to save the number.
ACCEPT
To dial outside telephone numbers without first selecting an outgoing line,
repeatedly until the name is erased.
MUTE
or the menu button to continue.
ACCEPT
#
repeatedly until the number is erased.
MUTE
or the menu button to exit.
ACCEPT
#
.
3 8 3
page
once to advance to the next character.
FWD
if you need to backspace.
) before the outside telephone
8
.
3 3
8
70.) The number
twice
FWD
61