MV Agusta Brutale Oro-S Workshop Manual page 41

Check the timing of the engine by ensuring that the
incision stamped on tooth (A) of the timing wheel is in
line with the "tooth" (B) that is present on the engine
casing.
The following photograph illustrates clearly the correct
position.
The position of the timing wheel is clearly seen in the
enlargement in respect of the mark on the engine
casing. Also the marks present on the toothed wheels
of the camshaft must be aligned together when the
timing wheel is in this position.
Utilising a feeler gauge of the type shown in the figure,
measure the play between the camshaft and the valve
cups.
Maintenance
- 27 -
B
A
B