Maintenance And Tuning Operations; Engine Oil And Oil Filter - MV Agusta Brutale Oro-S Workshop Manual

Table of lubricants and fluids
Description
Engine oil
Engine coolant
Brake and clutch fluid
Chain lubrication oil
* : To find the recommended product, MV Agusta suggests going directly to the authorised MV Agusta dealers.
AGIP Racing 4T 10W/60 has been manufactured for the F4 engine. If the described oil is not available, MV
Agusta suggests using completely synthetic oils with characteristics that
conform or exceed the following norms:
– Conforming to API SJ
– Conforming to ACEA A3
– Conforming to JASO MA
– Grade SAE 20 W-50 o 10 W-60
The above specifications indicated are marked either on their
N.B.
own or together with others on the container of the lubricating
oil.

MAINTENANCE AND TUNING OPERATIONS

Each operation of periodical maintenance is described
in this chapter.

ENGINE OIL AND OIL FILTER

Engine oil
Substitute: at the first 1000 kilometres and then
every 6000 kilometres
Oil filter
Substitute: at the first 1000 kilometres and then
every 6000 kilometres (or at least
every oil change)
To accede to the oil filter and the discharge and filling
holes of the engine oil, it is necessary to carry out cer-
tain operations beforehand:
Place the motorcycle on the rear stand.
n
The substitution of the engine oil must
be done with a hot engine as opposed to
N.B.
the oil-check that is done with a cold
engine.
Place a container underneath the engine to collect the
used oil.
Remove the oil discharge plug (1).
Recover the oil in an appropriate container.
Do not scatter the drainage oil into the envi-
ronment.
Maintenance
Recommended product
AGIP RACING 4T 10W/60 ( * )
AGIP ECO - PERMANENT
AGIP BRAKE FLUID DOT4
MOTUL CHAIN LUBE PLUS
- 11 -
Specification
SAE 10W/60 - API SJ
Ethylene-glycol
diluited with 40%
distilled water
Engine oil
SAE 10 W-60
API SJ
ACEA A3
JASO MA
1
B
DOT4
–