MV Agusta Brutale Oro-S Workshop Manual page 240

Upper chain guard removal
Remove the screw complete with ferrule.
Extract the chain guard by pulling it out from the back
part of the wheel (see figure) so that it is freed from its
position on the mono-arm fork.
Chain removal
F
Remove the chain utilising the special tool.
Special tool N. 800095389.
Identify the connecting link.
The part of the tool being indicated must operate on
the internal part of the crown wheel.
The tool has two functions:
N.B.
•
As a chain cutter: with a punch mounted
aligned at A.
•
As an anvil: with a raised punch aligned
at B.
Pre-assemble the tool as shown in the figure.
Align a pin with the central hole of the tool.
Suspension and wheels
- 40 -