MV Agusta Brutale Oro-S Workshop Manual page 248

Slacken the fixings (1) of the wheel hub.
With the special spanner mounted on the extension
F
tube, pull forward the eccentric adjuster and release
the chain from the crown wheel.
Special tool:
Eccentric adjuster spanner
Spanner extension
When adjusting the tension of the chain it is
necessary to carry out the motorcycle
set up adjustment. See "Motorcycle set up
adjustment" in this chapter.
Crown wheel assembly removal
Remove the wheel spindle nut (2) previously slacke-
ned and the spacer ring (4) underneath.
Remove the crown wheel assembly (3) by manually
pulling the assembly outwards.
Make sure that a spacer ring is present
between the flange and the hub.
Do not hit the crown wheel with metal
objects.
Suspension and wheels
N. 800092854
N. 800092855
- 48 -
1
1
2
4
3