MV Agusta Brutale Oro-S Workshop Manual page 107

Maintenance
Adjusting front headlight
Place the motorcycle 10 metres from a vertical wall.
Ensure that the ground is even and that the optical axis of the projector unit is perpendicular to the wall.
The motorcycle must be in a vertical position.. Measure the height of the centre of the beam from the ground and
B
mark it with a cross on the wall using a piece of chalk.
Switch on the dipped beam. The upper demarcation limit between the dark zone and the illuminated zone must
be not more than 9/10ths of the height from the ground of the centre of the beam.
- 93 -