MV Agusta Brutale Oro-S Workshop Manual page 218

Reassemble the hydraulic brake adjuster under com-
pression into its seat by utilising a new O-ring seal.
Torque pressure of the compression hydrau-
lic brake adjuster : 20 N•m
Insert the internal rod.
F
Maintain the sleeve in a vertical position. Introduce the
following amount of oil:
- BRUTALE ORO / S (MY 03):
- BRUTALE S (MY 04):
Press the pump rod up and down until a perfect fluidity
of movement is obtained.
Recommended oil:
- BRUTALE ORO / S (MY 03):
- BRUTALE S (MY 04):
Suspension and wheels
646 cc
655 cc
SAE 5
SAE 7.5
- 18 -
20 N•m