Brakes
Repeatedly squeeze the front brake lever, then hold it
continuing the braking action.
Remove the protection cap of the bleed valve of the
front right caliper.
Apply a rubber tube to the bleed valve (the valve is pla-
ced on the summit of the brake pincer).
Put the other end of the rubber tube in a suitable con-
tainer.
H
Slacken the bleed valve and empty the brake system.
Squeeze the brake lever and proceed until reaching
the minimum level in the chamber; top-up with new
brake fluid and continue the operation until brake fluid
of a different colour comes out.
N.B.
Repeat this operation on both pincers.
Tighten the bleed valve, remove the rubber tube and
insert the protection cap.
The quantity of brake fluid necessary for this operation
is approximately 250 cc.
- 7 -