FRONT MUDGUARD REMOVAL
Remove the four screws of the rear attachment of the
front mudguard as shown in the figure (the two lower
screws are mounted with a bush).
Remove the front brake tubing from the clip mounted
on the attachment.
Widen the attachment and slide it out of its seat.
Remove the two right and left screws with their bushes
from the mudguard.
H
FRONT BRAKE PADS SUBSTITUTION
Widen the pads with a pincer so that the pistons are
pushed back into their seats (as shown in the figure).
The movement towards the outside of the
brake pads makes the pistons go back into
their seats, with the consequent increase in
the level of the brake fluid in the brake fluid
chamber.
Brakes
- 4 -