MV Agusta Brutale Oro-S Workshop Manual page 127

During the reassembling make the same operations of
the disassembling paying attention to tighten the fixing
screws (1) of the ignition commutator to the described
torque wrench.
Torque wrench of the air filter compartment
fixing screws and locking support: 8 ÷ 10
N•m
Apply Loctite 243
If you had to remove the fixing screws of the throttle
body springs (1), during their reassembling apply the
described brakethread and tighten them to the indica-
ted torque.
Torque wrench of the fixing screws of the
throttle body fly springs: 5 ÷ 7 N•m
Apply Loctite 243
Bodywork
- 19 -
1
8÷10 N•m
5÷7 N•m
C
1