MV Agusta Brutale Oro-S Workshop Manual page 269

Frame
Remove the two fixing screws (1) of the front headlight
on the sides.
2
Take care to slide the adjuster out of its seat when the 1
headlight is removed from the support.
Before removing the front headlight, disconnect the
connector (2) placed in the rear part of the headlight.
Then remove the headlight support and the instrument
panel as described in chapter C "Bodywork".
Proceed removing the front brake pump and the clutch
control pump as described in chapter H "Brakes".
Free the clutch control hose (1) from the relative rub-
ber bands on the frame.
1
G
2
Operating on the right side, free the wiring from the
bands fixing it to the frame.
- 5 -