MV Agusta Brutale Oro-S Workshop Manual page 26

Maintenance
Remove the oil filler plug (1) on the right side of the
motorcycle so that it facilitates the discharge of the
used oil.
Wait until the lubrication system is completely empty of
B
used engine oil.
1
Substitution of the oil filter
In order to proceed to replace the oil filter you should
remove the exhaust manifolds of the cylinders 3 and 4.
Release the two side clamps of the oil cooler.
Unscrew the lower fixing screws of the oil cooler pro-
tection on the lower basis of the water radiator.
Remove the oil cooler protection.
- 12 -