Installation Using Wall Mount Bracket (4 305 22 Model) - LEGRAND 4 305 21 User Manual

2.7 Installation using Wall Mount Bracket (4 305 22 model)

①
Install Wall Mount Bracket on wall.
③
Connect "Drop Prevention Spring" to main
body to prevent camera from drop. Line up the
mold lines and turn main body on its axis in
CW(Clockwise) direction and assemble main body to
Terminal Cover.
②
Assemble Terminal Cover to Wall Mount
Bracket with 3 screws. (Do not use Rubber Gasket
!)
Locate the summit of the Plate Spring at the
arrow mark. (For more information, refer to the
"Terminal Cover Assembling" section)
④
After assembling them, screw main body to
Terminal Cover to protect them from separation by
vibration and so on.
24