Preset; Swing - LEGRAND 4 305 21 User Manual

3.5 Preset

 Function
 Setting Presets
 Running Presets
 Deleting Presets

3.6 Swing

 Function
 Setting Swings
 Running Swings
 Deleting Swings
MAX. 127 positions positions are programmable. The Preset number can be
except 95. Preset 95 is reserved for entering into OSD menu. Camera parameters such as except 95. Preset 95 is reserved for entering into OSD menu. Camera parameters such as except 95. Preset 95 is reserved for entering into OSD menu. Camera parameters such as
White Balance, Auto Exposure and others can be set up independently and each preset can White Balance, Auto Exposure and others can be set up independently and each preset can White Balance, Auto Exposure and others can be set up independently and each preset can
have its own parameter values independently from the other persets have its own parameter values independently from the other persets have its own parameter values independently from the other persets. When setting up
presets with a controller, Label should be blank and "Camera Adjust" should be set to presets with a controller, Label should be blank and "Camera Adjust" should be set to presets with a controller, Label should be blank and "Camera Adjust" should be set to
"GLOBAL" as the default. To change the parameters, enter into OSD menu. "GLOBAL" as the default.
Set Preset [1~128] Set Preset [1~128]
Go Preset [1~128] Go Preset [1~128]
To delete Presets, enter into To delete Presets, enter into OSD menu.
This function function is that the camera moves repetitively between two preset positions at
programmed speeds. When a swing function runs, the camera moves from the preset programmed speeds. When a swing function runs, the camera moves from the preset programmed speeds. When a swing function runs, the camera moves from the preset
assigned as the 1st point to the preset assigned as the 2nd point in CW(Clockwise) direction. assigned as the 1st point to the preset assigned as the 2nd point in CW(Clockwise) direction. assigned as the 1st point to the preset assigned as the 2nd point in CW(Clockwise) direction.
Then the camera moves from the preset assigned as the 2nd point to the preset assigned as Then the camera moves from the preset assigned as
the 1st point in CCW(Counterclockwise) direction. the 1st point in CCW(Counterclockwise) direction.
In case that the preset assigned as the 1st point and the preset assigned as the 2nd point are In case that the preset assigned as the 1st point and the preset assigned as the 2nd point are In case that the preset assigned as the 1st point and the preset assigned as the 2nd point are
same, the camera turns on its axis by 360 same, the camera turns on its axis by 360 in CW(Clockwise) direction and then it turns back
on its axis by 360 in CCW (Counterclockwise) direction. The Swing speed is defined from on its axis by 360
1/sec to 180 /sec to 180/sec.
To set Swing, enter into OSD menu. To set Swing, enter into
Method 1) <Run Pattern> [Swing NO. + 10] Method 1) <Run Pattern> [Swing NO. + 10]
Method 2) <Go Preset> [Swing NO. + 140] Method 2) <Go Preset> [Swing NO. + 140]
To delete Swings, enter into To delete Swings, enter into OSD menu.
The Preset number can be assigned from 1 to 128
o change the parameters, enter into OSD menu.
between two preset positions at
(Counterclockwise) direction. The Swing speed is defined from
ex) Run Swing 3 : <Run Pattern> [13] ex) Run Swing 3 : <Run Pattern> [13]
ex) Run Swing 3 : <Go Preset> [143] ex) Run Swing 3 : <Go Preset> [143]
34
the 2nd point to the preset assigned as
ction and then it turns back