Osd Display - LEGRAND 4 305 21 User Manual

3.10 OSD Display

 P/T/Z Information
 Camera ID
 Action Title
 Preset Label
 Alarm Information
Displays the amount of pan from zero degree vertical, the amount of tilt from zero degree Displays the amount of pan from zero degree
horizontal and current compass direction. Also identifies the amount of the zoom horizontal and c compass direction. Also identifies the amount of the zoom
magnification. magnification.
Displays the selected Camera ID (Address). Displays the selected
Identfies Actions Identfies Actions
"SET PRESET xxx" "SET PRESET xxx"
"PRESET xxx"
"PATTERN x"
"SWG/PRESET xxx" /PRESET xxx"
"UNDEFINED"
Displays preset labels when the camera arrives at presets. Displays preset labels when the camera arrives at presets.
Displays activated alarms. This information shows current state of Alarm I Displays activated alarms.
Outputs. If an Input nput point is ON state, it will show a number corresponding to each
Input point is OFF OFF state, '-' will be displayed.
Example: The p The point 2 & 3 of inputs are ON and Output is ON, OSD will show as below
vertical, the amount of tilt from zero degree
When Preset xxx is memorized.
When the camera reaches Preset xxx. When the camera reaches Preset xxx.
When Pattern x is in action.
When Swing x is in action. Displays both of Swing number and When Swing x is in action. Displays both of Swing number and
Preset number.
When a undefined function is called to
This information shows current state of Alarm Inputs and Relay
it will show a number corresponding to each point. If an
38
is called to run
OSD will show as below.