Group Setup - LEGRAND 4 305 21 User Manual

4.10 Group Setup

 Group Number
 Clear Group
 Run Group
 Edit Group
Group Edit
1) Press Near key when the cursor is at key when the cursor is at "NO" to start editing the selected Group.
2) Note that MAX. 20 actions are allowed in a Group. Move the cursor up/down to select an Action. Press Near key to edit. Note that MAX. 20 actions are allowed in a Group. Move the cursor up/down to select an Action. Note that MAX. 20 actions are allowed in a Group. Move the cursor up/down to select an Action.
[1~8]
Selects a Group number to edit. Group number to edit.
If the selected Group number is not defined, "UNDEFINED" will be displayed under selected Group number is not defined, "UNDEFINED" will be displayed under selected Group number is not defined, "UNDEFINED" will be displayed under
the selected Group number. selected Group number.
[CANCEL/OK]
Deletes the data data of the selected Group.
Runs the Group the Group for the test purposes to check if it works properly.
Edit the selected Group. Edit the selected
55