LEGRAND 4 305 21 User Manual page 49

 Hold Time
[ENDLESS / 1~59 SEC. / 1~180 MIN.]
Sets the time period for the action which is run by external sensor activation. After the time period
passes, the action pre-defined in "Post Action" runs sequentially in succession to the action by external
sensor activation. If this option is set to "ENDLESS", "Post Action" does not activate.
 Post Action
[HOME/PRESET/PATTERN/SWING/GROUP/PREV ACTION]
Selects the action that a camera will run after the time period in"HOLD TIME" passes. If Post Action is
set to "PREV. ACTION", the camera runs the previous action which it ran most recently.
49