Pattern Setup - LEGRAND 4 305 21 User Manual

4.9 Pattern Setup

 Pattern Number
 Clear Pattern
 Run Pattern
 Edit Pattern
Pattern Edit
1) With the Joystick of your controller, move the camera to the start position with an appropri With the Joystick of your controller, move the camera to the start position with an appropriate zoom magnafication. To With the Joystick of your controller, move the camera to the start position with an appropri
start the pattern recording, press NEAR
2) Move camera with joystick of controller or run preset function to Move camera with joystick of controller or run preset function to memorize the path (mostly curve path) in the selected
pattern. The movement by Joystick and preset movement will be memorized in a pattern. movement by Joystick and preset movement will be memorized in a pattern. movement by Joystick and preset movement will be memorized in a pattern. After a pattern is
programmed, the remaining storage is displayed in progress bar on the screen. programmed, the remaining storage is displayed in progress bar on the screen.
3) To save the data and exit, press NEA
[1~4 ]
Selects a Pattern number to edit. If the selected pattern number is not defined, "UNDEFINED" will Selects a Pattern number to edit. If the selected pattern number is not defined, "UNDEFINED" will Selects a Pattern number to edit. If the selected pattern number is not defined, "UNDEFINED" will
be displayed under the selected pattern number. be displayed under the selected pattern number.
[CANCEL/OK]
Deletes the data of the the data of the selected pattern.
Runs the Pattern for the test purposes to check if it works properly. Pattern for the test purposes to check if it works properly.
Edits the selected pattern. Edits the selected pattern.
NEAR key. To exit, press FAR key.
EAR key. To cancel saving the data and delete the data, press
memorize the path (mostly curve path) in the selected
54
ata, press FAR key.