Installation Using Ceiling Mount Bracket (4 305 22 Model) - LEGRAND 4 305 21 User Manual

2.6 Installation using Ceiling Mount Bracket (4 305 22 model)

①
To pass cables to upside of ceiling, please
make about 50~60mm hole on the ceiling panel and
attach the Ceiling mount bracket on it.
③
Connect "Drop Prevention Spring" to main
body to prevent camera from drop. Line up the
mold lines and turn main body on its axis in
CW(Clockwise) direction and assemble main body to
Terminal Cover.
②
Assemble Terminal Cover to Ceiling Mount
Bracket with 3 screws. (Do not use Rubber Gasket !)
Locate the summit of the Plate Spring at the
arrow mark. (For more information, refer to the "Terminal
Cover Assembling" section)
④
After assembling them, screw main body to
Terminal Cover to protect them from separation by
vibration and so on.
23