Setting Scan Settings Automatically (Auto Set); Checking The Image To Be Transmitted - Sharp MX-M6570 User Manual

Digital multifunctional system

Hide thumbs Also See for MX-M6570:

Table of Contents

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE

SETTING SCAN SETTINGS AUTOMATICALLY

To automatically set scan settings appropriate for the original, tap the [Auto Set] key in the base screen of Easy Mode.

E-mail Address

The following functions are set automatically.

• Image Orientation

• Resolution

• Blank Page Skip

Each function setting value/parameter can be changed in setting mode.

• When "Auto Set" is enabled, grayed out functions cannot be enabled.

• When an Internet Fax address is selected, "Auto Set" cannot be enabled.

To change the "Auto Set" setting, use "Settings (administrator)" - [System Settings]→ [Image Send Settings] → [Scan

Settings] → [Condition Settings] → [Auto Scan Setting].

The settings below can be selected.

• Set Image Orientation Automatically

The orientation of placed originals can be automatically detected. Set whether the original is scanned by one-sided

scanning or two-sided scanning.

• Set Resolution Automatically

You can have the machine automatically set the resolution.

• Blank Page Skip

Set whether or not blank original pages are automatically skipped during scanning.

CHECKING THE IMAGE TO BE

Check the image that will be sent in the touch panel before transmission.

You can tap the [Preview] key to check a preview of the image before sending an image. As you can adjust the exposure

and resolution to scan the original while checking it in the preview screen, you can send a better quality original to the

destination.

• Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.

• The preview function is not available when the original size is set to Long Size.

Chapters

Table of Contents