Mounting The 4Coidb Pcb; Figure 2-69 Replacing The Main-Cover; Figure 2-70 Plastic Knockouts On 084M-B1/080E-B1/008E-B1/000E-B1; Figure 2-71 Installing The 4Coidb-B1 - NEC SL1100 Hardware Manual

SL1100
9. Replace the Main-cover and fasten two screws.
Main-Cover
Hooks

3.3.2 Mounting the 4COIDB PCB

1. Cut and remove specified Plastic Knockouts on the 084M-B1/080E-B1/008E-B1/000E-B1 PCB.
Plastic
Knockout
Plastic
Knockout

Figure 2-70 Plastic Knockouts on 084M-B1/080E-B1/008E-B1/000E-B1

2. Insert two Nylon-spacers into the specified holes. Using supplied screw, fasten Metal Spacer to
4COIDB-B1 PCB.
3. Mount the 4COIDB-B1 PCB onto the 084M-B1/080E-B1/008E-B1/000E-B1 PCB using two Nylon-
spacers and one screw. (Refer to
2-48

Figure 2-69 Replacing the Main-cover

084M-B1
080E-B1/008E-B1
Figure 2-71 Installing the 4COIDB-B1 on page
Two screws
Plastic
Knockouts
ISSUE 5.0
000E-B1
2-49)
Installation