12 Button Digital Tel
24 Button IP Tel
Call Indicator Lamp
This lamp flashes fast when a call is ringing, or
flashes slower when a message has been left.
The LCD has 3 lines, 24 characters with
Exit any screen and return the display to "Time
Explanations of Programmable Keys can be
called up on the LCD by pressing and holding
the Help key plus a programmable key.
The Soft Keys show the available features for
your current activity. Any feature shown at the
bottom of the LCD is available.
Programmable Function Keys
Flexible Line keys or Feature keys assigned by
the System Administrator.
Press key to finish an outside call and hear the
Allows the extension user to transfer established
calls to another extension.
Mute (Microphone) Key
Mute handset or handsfree microphone. LED
lights when microphone is muted.
DND (Do Not Disturb) Key
Set up a Do Not Disturb if pressed during a call.
Press this key to cancel the current action or
delete a character.
Access various features with simple operation.
Controls built-in speaker, which can be used for
Hands Free Dialing/Monitoring. LED on key
lights when key is active.
Press this key to place an internal or external
call on hold.
MAKE A CALL
Lift the Handset or press Speaker.
Dial the required number.
(For external calls, dial 9 first)
The access codes are default only, and may
have been changed for your system.
LAST NUMBER REDIAL
Without lifting handset, press the REDIAL
Press the Cursor key left/right to search
the required number.
Press the Speaker key or lift the handset
to initiate the call.
Ask the caller to please hold:
Press the Hold key – held key flashes.
You may replace handset if you wish.
To retrieve a call:
Lift the handset.
Press the flashing line.
For exclusive hold – press Feature + Hold.
Allows a user to intercom other digital handsets.
Lift the handset and dial extension
Press Voice soft key and speak over the
With a call in progress:
Press the Transfer key.
Dial an extension or external number and
announce the call (optional).
Replace the handset.
If the called extension is busy or does not
answer, press the Flashing key to return to your
caller. If the extension does not accept the call,
ask them to hang up and your call is returned.
With a call in progress (internal or external)
Press the Conf soft key.
Dial an internal or external number.
When the third party answers, press the
Add soft key.
Press the Begin soft key to begin the
A three way conference is now
Any party may exit the conference by hanging
up. The two parties will remain connected, as
long as one of the remaining parties is internal.