Figure 2-6 Screw Positions; Figure 2-7 Sub-Cover Slide-Out - NEC SL1100 Hardware Manual

ISSUE 5.0
2. Install four screws into the wall. The screw heads must stand off from the wall about 2.5 mm
(0.098") to 3.5 mm (0.138").
• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the KSU.
• The screw diameter is 4 mm (0.158") to 4.5 mm (0.177").
3. Push the center of the Sub-Cover and slide it outward.
Hardware Manual
285 mm (11.221")
285 mm (11.221")

Figure 2-6 Screw Positions

Figure 2-7 Sub-Cover Slide-out

2.5 mm (0.098") -
3.5 mm (0.138")
180 mm
(7.087")
Sub-Cover
SL1100
2-7