Electromagnetic Compatibility - NEC SL1100 Hardware Manual

SL1100
The packaging for the SL1100 system contains the following labels regarding proper disposal.
Pb
EUROPEAN UNION INFORMATION
Notice to the user
The system described in this manual is intended to be connected to analog and digital networks and
supports a wide range of peripheral equipment. The following interfaces are available for connection to
public analog and digital telecommunication networks:
• TBR3 ISDN basic rate interface
• TBR4 ISDN primary rate interface
• ES203-021 Analogue interface
To take advantage of all features of this system and the connected equipment, the country or network
specific features should match the supported features of the system. For an overview of the supported
features, refer to the detailed documentation that comes with this system, contact your local NEC
Unified Solutions representative or the support desk of NEC Unified Solutions.
Declaration of conformity
Hereby, NEC Unified Solutions, declares that the SL1100 is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
For the Declaration of Conformity, visit: http://www.nec-unified.com/doc

Electromagnetic Compatibility

For the SL1100 system the following warning is applicable:
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
R-6
CONTAINS SEALED LEAD BATTERY.
BATTERY MUST BE RECYCLED. MUST NOT
BE DISPOSED OF IN MUNICIPAL WASTE.
Warning
ISSUE 5.0
Regulatory