Troubleshooting Chart; Turning On The Verification Tone; Maintenance; Repeater - NEC SL1100 Hardware Manual

SL1100

6.2.3 Troubleshooting Chart

To review common problems and possible solutions, refer to the Cordless DECT Repeater Guide
DTL-RPT-1.

6.2.4 Turning on the Verification Tone

To activate the verification tone to aid in troubleshooting installation problems, refer to the Cordless
DECT Repeater Guide DTL-RPT-1.

6.2.5 Maintenance

For user maintenance of the repeater, refer to the Cordless DECT Repeater Guide DTL-RPT-1.
6.3 Installing the DTL-RPT-2 Cordless DECT Telephone REPEATER
Do not mix DTL-RPT-1 and DTL-RPT-2 repeaters on the same Cordless
DECT Terminal (DTL-8R-1).
The DTL-RPT-2 Repeater repeater lets you extend the coverage area of your D
telephone system in all directions, including up and down. If the repeaters are installed so their
coverage area overlaps the coverage area of the base, the base can hand-off calls to the repeaters as
the user moves from one coverage area to another. When connected to the repeater, the mobile
handset operates the exact same way as it does when connected to the base, and the hand-off from
the base to the repeater can be completely invisible to the end user, even during an active call.
2-104
ISSUE 5.0
term
DECT Cordless
Installation