SL1100
3.
Loosen two screws and remove the Main-Cover.
Two screws
4.
Insert two Nylon-spacers into the specified holes, and fasten two Metal-spacers into the specified
holes. (Both Nylon and Metal spacers are provided with 080E/008E/000E/1PRIU)
If no more Expansion Interface cards are to be mounted on the 1st PCB, fasten two screws to
secure the 1st PCB on the top of the 080E/008E/000E/1PRIU.
Expansion Interface Card
(1st PCB)
Nylon-Spacers
J21
2-44
Figure 2-63 Removing the Main-Cover
Figure 2-64 Mounting the 1st Expansion Interface Card
Main-Cover
Hooks
J1
ISSUE 5.0
Screws
Screw position
1st EXP.
PCB
Both sides are
the same.
Metal-Spacers
Installation