Figure 2-14 Exifb-C1 Pcb Installation; Figure 2-15 Removing The Plastic Knockouts; Figure 2-16 Replacing The Main-Cover - NEC SL1100 Hardware Manual

ISSUE 5.0
4. Press tab A and lift the CPU support bracket.
5. Insert the EXIFB-C1 PCB into the J1 connector on the 084M-B1 at 1228M-B KSU.
6. Close the CPU support and make sure the tab A locks into place.
7. Cut and remove the Plastic Knockouts as needed for Expansion KSU.
Main-Cover
8. Replace the Main-Cover and fasten two screws.
Main-Cover
Hooks
Hardware Manual
CPU support
A
084M-B1 at 1228M KSU

Figure 2-14 EXIFB-C1 PCB Installation

Figure 2-15 Removing the Plastic Knockouts

Figure 2-16 Replacing the Main-Cover

EXIFB-C1 PCB
J1
Plastic Knockouts
Two screws
SL1100
CPU support
2-11