Pcl Settings List - Fuji Xerox DocuPrint CM505 da Administrator's Manual

PCL Settings List

The following table describes the parameters that can be set with the mode menu.
Parameter Item No.
Paper tray 201
Auto size 202
Bypass size 203
Orientation 205
2 Sided printing 206
Sets the paper tray to be used for printing.
[0] (Default) : Auto
[1] : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
Important • When Trays 1 to 4 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper Size] cannot be set.
Note • When [Auto] is selected and paper of the same size in the same
orientation in multiple trays is loaded, paper will be fed in the order of
Tray 1 Tray 2
loaded in multiple trays but in different orientations, feeding of the
paper loaded in the landscape orientation is prioritized.
Sets the default paper size. Only available when [Paper Tray] is set to
[Auto]. Only cut sheet can be set.
[4] (Default*) : A4
[5] : A5
[15] : B5
[21] : 8.5 × 14"
[22] : 8.5 × 13"
[23] (Default*) : 8.5 × 11"
[25] : Custom Size
[30] : 8K
Important • When Trays 1 to 4 is selected, [Paper Size] cannot be set. The paper
size loaded in the specified tray is displayed.
Note • When Trays 1 to 4 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper Size] cannot be set.
• Depending on the combination of [Original Size] and [Paper Size], [?]
may be displayed for the magnification. In this case, the document is
printed at a scale of 100%.
Sets the default paper size. Only available when [Paper Tray] is set to
[Auto]. Only cut sheet can be set.
[4] (Default*) : A4
[5] : A5
[15] : B5
[21] : 8.5 × 14"
[22] : 8.5 × 13"
[23] (Default*) : 8.5 × 11"
[25] : Custom Size
Set the orientation of paper.
[0] (Default) : Portrait
[1] : Landscape
Sets the 2 sided printing.
[0] (Default) : Off
[1] : On
Value
Tray 3 Tray 4. If paper of the same size is
PCL Emulation
14
531