Fuji Xerox DocuPrint CM505 da Administrator's Manual page 167

RARP
The address, subnet mask, and gateway address will automatically be set via RARP.
DHCP/Autonet
The address, subnet mask, and gateway address will automatically be set via DHCP/Autonet.
If the machine fails to communicate with the DHCP server, the AutoIP function is
automatically enabled and the machine is assigned an IP address (169.254.xxx.xxx). When
communication between the machine and the DHCP server recovers, the machine is re-
assigned an IP address, a subnet mask, and a gateway address by the DHCP server.
STATIC
Allows you to manually specify an IP address, a subnet mask, and a gateway address.
Note • To configure a subnet mask and a gateway address, an IP Address must be set first.
IPv4 - IP Address
Enter the IP address using the keyboard displayed or the numeric keypad when selecting
[STATIC] at [IPv4 - IP Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to
• Specify an IP address using numbers (0 to 9) and periods (.). If you mistyped a character on
IPv4 - Subnet Mask
Enter the subnet mask using the keyboard displayed or the numeric keypad when selecting
[STATIC] at [IPv4 - IP Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to
• Specify a subnet mask using numbers (0 to 9) and periods (.). If you mistyped a character on
IPv4 - Gateway Address
Enter the gateway address using the keyboard displayed or the numeric keypad when
selecting [STATIC] at [IPv4 - IP Address Resolution].
Note • Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to
• Specify a gateway address using numbers (0 to 9) and periods (.). If you mistyped a
IPv4 - DNS Server Setup
Set the DNS server.
Get IP Address from DHCP
Set whether or not to automatically obtain the address of the DNS server from the DHCP
server.
DNS Server IP Address
When [Get IP Address from DHCP] is set to [Disabled], manually set the DNS server
address.
IPv4 - IP Filter
Select whether or not to limit IPv4 addresses that can access the machine.
Note • [IPv4 - IP Filter] applies to all features using TCP/IP, such as the Print, Store to Folder, and
• To set the IPv4 IP addresses that the machine accepts connection from, use [IP Filtering] in
255.
the screen, select [Backspace] to delete the character.
255.
the screen, select [Backspace] to delete the character.
255.
character on the screen, select [Backspace] to delete the character.
CentreWare Internet Services.
CentreWare Internet Services. For more information, refer to the help of CentreWare
Internet Services or refer to "CentreWare Internet Services Settings" (P.251).
Connectivity & Network Setup
5
167