Fuji Xerox DocuPrint CM505 da Administrator's Manual page 397

When "Switch the machine off" is displayed
A NetWare problem
occurred.
When print result is not what was expected
The printer language of the
print data and the printer
language configured on the
machine are different.
When no notification is received
The possible causes, check points, and remedies when a computer that instructed a
print job does not receive notification are as follows:
When the printing problems are not notified
The user is not listed on the
print server notification
recipient list.
When the completion of the job is not notified
The [Notify] option was not
specified when the computer
transmitted the print data.
Netware command
[CASTOFF] has been
executed on the computer.
Cause
Cause
Confirm the printer language
on the machine.
Cause
Use PCONSOLE on the
computer to confirm whether
the job user or user's group
is registered under [Print
Server Information] >
[Printer] > [Printer xxx
Environment Settings] >
[Notify].
Cause
Confirm whether the [Notify]
option is specified when
transmitting the print data.
Check point
Restart the machine. Wait
until the screen completely
-
goes out to switch on the
machine power.
Check point
Match the printer language
of the print data and the
printer language configured
on the machine.
Check point
Add the name of the job user
or the name of the user's
group to [Notify].
Check point
Specify the [Notify] option
when transmitting the print
data.
Execute the NetWare
- command [CASTON] on the
computer.
Network-related Problems
Remedy
Remedy
Remedy
Remedy
397
13