Printable Area - Fuji Xerox DocuPrint CM505 da Administrator's Manual

Printable Area

This section describes the area on paper that can be printed.
Standard Printable Area
The standard printable area is the area of a sheet of paper excluding the 4.0 mm
margins on all four edges of paper.
Extended Printable Area
When you select the extended printable area setting for printing, you can expand the
width and length of the printable area to 210.9 x 351.6 mm and the print assured area
to 207.9 x 347.6 mm.
Note
For more information on the setting method on the print driver, refer to the help provided for the print
driver. For more information on the setting on the control panel, refer to "Print Area" (P.184).
Print/Copy
Fax
• To extend the printable area, change the PCL print driver setting, or the [Print Area] setting
on the touch screen.
When the paper width is less
than 8.5 inches (Legal)
2 mm
2 mm
Unprintable area
4 mm
Printable area/
Guaranteed
2 mm
print area
2 mm
Unprintable area
4 mm
Printable area/
Guaranteed
2 mm
print area
2 mm
Printable Area
14
505