Fuji Xerox DocuPrint CM505 da Administrator's Manual page 414

13 Problem Solving
13
414
Error Code
016-405
[Cause]
[Remedy] Initialize the certificate.
For more information on initializing certificates, refer to "Delete All Certificates/
Initialize Settings" (P.147).
016-406
[Cause]
[Remedy] Take one of the following measures:
016-407
[Cause]
016-408
[Remedy] Modify the customized program and install it again.
016-409
016-410
016-411
016-412
016-413
[Cause]
[Remedy] Check the followings:
016-414 [Cause]
[Remedy] Check the followings:
If the error still is not resolved after checking the above settings, there may
016-417
[Cause]
[Remedy] Check the followings:
If the error still is not resolved after checking the above settings, there may
be a network failure. Consult your system administrator.
016-450 [Cause]
[Remedy] Change the host name.
Refer to "Host Name" (P.169).
016-453
[Cause]
[Remedy] Check whether the IP address of the DNS server is set correctly.
Cause and Remedy
An error occurred in the certificate stored in the machine.
An error occurred in the SSL client certificate.
Store an SSL client certificate in the machine to set the SSL
client certificate.
If an SSL client certificate cannot be set on the machine, select
an option other than [EAP-TLS] in [Authentication Method].
There is a problem with the customized program registered on
the machine.
After automatically obtained the IP address, the machine failed to
retrieve proxy server settings from the DHCP server.
The default gateway setting
The subnet mask setting
The DNS server address settings
If the error still is not resolved after checking the above settings,
there may be a network failure or a DNS server failure. Consult
your system administrator.
A network error occurred.
The LAN cable connection
The IP address setting
The default gateway setting
The subnet mask setting
The DNS server address settings
The proxy server setting
be a network failure. Consult your system administrator.
Communications with the Xerox Communication server failed.
The IP address setting
The default gateway setting
The subnet mask setting
The DNS server address settings
The proxy server setting
The server verification feature of the destination server is
disabled
The SMB host name already exists.
Updating of the IPv6 address and host name for the DNS server
failed.