Viewing Network Settings; Viewing Logged In Users; Viewing Slot Information - Quantum Scalar i500 User Manual

• Slots — including the type, assigned partition (storage and import/export [I/E] station slots only),
location coordinates, barcode (storage and I/E station slots only), cartridge type, cleaning status
(cleaning slot only), and element address of each slot
• Partitions — including the name, mode status, emulation type, barcode policy, total tape drives,
active tape drives, total cartridges, mounted cartridges, total slots, full slots, total I/E stations, full I/
E stations, and AutoClean setting of each partition
Modules — including the manufacturer, model number, and serial number of each module
•
The path to open the report from the web client is Reports > Library Configuration.

Viewing Network Settings

The Network Settings report provides information on the following library settings:
• Network settings — host name, Dynamic Host Configuration Protocol (DHCP) settings, IP
address, gateway, and network mask of the library
• SSL settings — SSL, port, and cipher of the library
• SMI-S state — SMI-S state setting of the library
• SNMP settings — v1, v2, v3, algorithm, encryption, and port of the library
• SNMP-Traps — IP addresses and ports of the library
The path to open the report from the web client is Reports > Network Settings.

Viewing Logged in Users

The User Login report contains information about the users that are currently logged into the library. The
report contains the following information:
• User name — name of logged-in user
• Role name — privilege level of logged-in user (Admin for administrative user, User for non-
administrative, non-service user)
• Login date and time — date and time the user logged into the library
Last activity date and time — date and time the user last logged into the library
•
• Login location — IP address or host name of the system being used to access the system
• Management interface — user interface being used to access the system (Web for web client,
Local for operator panel)
The path to open the report from the web client is Reports > Logged in Users.

Viewing Slot Information

The All Slots report contains information on all slots that are currently assigned to a partition and all I/E
slots. The report contains the following information about each slot:
• Slot type — I/E station slot, cleaning slot, or storage slot
• Barcode — number of the cartridge installed in the slot (no barcode means the slot is empty)
• Partition — partition that owns the slot
92 Getting Information