User Access - Quantum Scalar i500 User Manual

• All users are logged out automatically after a configurable period of inactivity. The default timeout
period is 30 minutes, but users with administrative privileges can change this to a value from 15
minutes to 480 minutes (eight hours). See
is invoked after 10 minutes of inactivity on the operator panel. After an hour of inactivity, the screen
will appear black. If the user has not been logged out for inactivity, touching the operator panel will
reactivate it, returning the user to the screen last in use. (The web client interface does not use a
screen saver.)
• An administrative user can disable any access to the library from the web client interface. For more
information, see
• When a service user logs in, all other active users are automatically logged out.
• For security purposes, an administrative user can prevent a service user from logging on to the
library remotely, from either the web client interface or over the ethernet service port. The service
user will still be able to log on to the library from the operator panel interface. For more information,
see Configuring System Settings

User Access

See Table 2 on page 27 for the web client menu tree and privilege level information. See
page 28 for the operator panel menu tree and privilege level information.
30 Understanding the User Interface
Configuring Library Security Settings
on page 72 .
Configuring System Settings
on page 71.
on page 72.A screen saver
Table 3 on