2
Place a ferrule on the end of each stud, and screw it on completely. The larger side of the ferrule should
face the rack shelf, and the tapered end should face out. Be sure to use the proper size ferrule as
described in
Preparing Rackmount Kit for Installation
1
ferrule
2
stud
3
Install the rackmount shelves into the rack so that they are level with one another.
a. Install the shelf's rear studs in the rack's rear mounting holes.
b. Position the shelf to the appropriate side of the rack (right or left) and align the shelf at the
desired height.
c. Insert the shelf's rear studs into the rack's rear mounting holes.
d. Fasten a thumbnut to the end of each stud. Secure the rack tightly, so that the ferrule fits snugly
within the hole in the rack.
184
Installing, Removing, and Replacing
on page 181.
2
1