Completing The Library Configuration With Menu Commands; Using The Setup Wizard - Quantum Scalar i500 User Manual

The library ships with a default administrative user account. The user name on the account is admin and
the password is password. When you see the Login screen on the operator panel or web client, type admin
in the User Name text box and password in the Password text box. As soon as the initial setup is complete,
you should change the password on the default administrative account. For information on changing
passwords, see Modifying Local User Accounts
You cannot delete the default administrative user account or modify the user
Note
name. You can, however, change the password.
If you misplace the password for the default administrative account, contact
Note
Technical Support. For contact information, see
Help on page 4.

Completing the Library Configuration With Menu Commands

The Setup Wizard is an aid to assist you with the initial configuration of the library. You can always return
to the Setup Wizard by selecting it from the Setup tab on the operator panel or the Setup menu on the web
client.
The Setup Wizard, however, contains only a subset of configuration tasks. The operator panel tabs and web
client menus provide access to most configuration options that are included in the Setup Wizard and many
that are not. Once the initial Setup Wizard session is complete, administrative users can choose whichever
method is most convenient or necessary for modifying library settings.
The following topics cover using the Setup Wizard as well as Setup and Operations commands to configure
the library. Paths to open the appropriate screens on both the operator panel and the web client are given
for each task. For the operator panel, the paths refer to the navigation tabs at the top of the home page. For
the web client, the paths refer to the menus.
For the menu trees on both the operator panel and web client, see
Power cycling (powering the library on and off) is not necessary to configure
Note
the library.

Using the Setup Wizard

The Setup Wizard simplifies the process of configuring the library. When you first power on the library, the
operator panel displays the Setup Wizard.
The recommended procedure for using the Setup Wizard for the initial configuration is as follows:
1 Turn on the library and begin using the Setup Wizard on the operator panel. Be sure to configure
network settings.
2 When the Setup Wizard screen text prompts you to choose Local or Remote, choose Remote.
3 Log out of the operator panel.
4 Using the default administrative account, log in to the web client. Type admin in the User Name text box
and password in the Password text box.
5 Complete the Setup Wizard screens on the web client interface. The final Setup Wizard screen will
prompt you to apply your settings.
32 Configuring Your Library
on page 59.
Getting More Information or
Menu Trees on page 26.