Figure 9 Fc I/O Blade - Quantum Scalar i500 User Manual

FC I/O menu commands are available for use only when FC I/O blades are
Note
installed in the library.
The FC I/O blade indicates its status with three LED status indicators. These indicators are green, amber,
and blue in color.
• Green represents processor status.
• Amber represents health status.
• Blue represents power-control status.
Figure 9 shows the I/O Blade, including LEDs. For more information on the behavior of the I/O Blade LEDs,
see LCB and FC I/O Blade LEDs
With FC I/O Blades on page 62 in. See
installing and cabling FC I/O blades and FC tape drives.
Figure 9 FC I/O Blade
1 FC ports to host(s)
2 FC ports to drives
3 LEDs (blue, amber, green)
Scalar i500 User's Guide
on page 215.For information on configuring I/O blade ports, see
Installing, Removing, and Replacing
1
2
3
Working
on page 101 for information on
17