Honda Prelude 1993 Service Manual page 1385

Hide thumbs Also See for Prelude 1993:

Table of Contents

Supplemental Restraint System (SRS)

Troubleshooting (s6n1'd1

Oisconnect the driver's airbag 3-P connector from

the cable reel, then connect Test Harness C

(07LAZ-SL4O3OO) to the driver's airbag 3-P

Check continuity betwsen the No. 7 terminal and

body ground, and between the No. 8 terminal 8nd

body ground.

TEST HAR ESS C

oTLAZ - SL4og)O

It there is continuity at either te.minal, the

dfiver's airbag intlator is laulty. Replace it and

recheck the voltages according to the chart on

page 23-3O4.

lf there is no continuity at either terminal, the

cable reel is faulty, Replace it and recheck the

voltages according to the chsrt on page 23-304.

FRONT PASSENGER'S AIRBAG

1O. Disconnect the front passenger's airbag 3-P con-

nector from the SRS main harness, then connect

Test Harness C {07LAZ-SL4O3O0) to the airbag

side of the connector.

TEST HARNESS C

07LAZ_S140300

Check continuity between the No. 7 terminal and

body ground, and between the No. 8 terminal and

body ground.

TEST HARNESS C

oTLAZ - SL403qt

lf there is continuity at either terminal, the front

passenger's airbag inflator is faulty. Replace it

and recheck the voltages sccording to ths chart

on page 23-304.

It there is no continuity at either terminal, the

SRS main harness is faulty. Replace it and

recheck the voltages according to ths chart on

page 23-304.

Troubleshooting