Solving Problems-Printing Quality - Minolta magicolor 7300 User Manual

Solving Problems—Printing Quality
Symptom
Nothing is
printed, or
there are
blank spots
on the
printed page.
Entire sheet
is printed in
black or
color.
Solving Problems—Printing Quality
Cause
One or more of the
toner cartridges is
damaged.
The printer driver is
not set correctly.
The media is moist
from humidity.
The media set in the
printer driver
mismatches the
media loaded in the
printer.
The power source
does not match the
printer specifications.
Several sheets are
being fed at the same
time.
Media is not set
properly in the media
tray(s).
The printer is not on a
level enough surface.
One or more of the
print units are
defective.
Solution
Remove the toner cartridge and check
for damage. If necessary, replace it.
Select the proper setting in the printer
driver to switch from transparency
(OHP) film to plain paper.
Adjust the humidity for paper storage.
Remove the moist media and replace it
with new, dry media.
Load the correct media in the printer.
Use a power source with the proper
specifications.
Remove the media from the tray and
check for static electricity. Fan plain
paper or other media (but not
transparencies), and replace it
in the tray.
Remove the media, tap it to straighten
it out, return it to the media tray, and
realign the media guides.
Relocate the printer on a flat, hard,
stable, level surface that is large
enough to hold the printer.
Remove the print unit(s) and check for
damage. If necessary, replace it
(them).
195