25
Plug the black 3-pin connector on that
power supply harness B into Tray 4's
black 3-pin socket on power supply
harness A (with the core attached).
Then, plug the power supply harness
A's white 2-pin connector into the white
PJ6 socket on Tray 4's unit.
26
Secure the harness with the cable
holders so that the core is between the
holders on Tray 4's unit.
27
Secure the long looped
harness with the cable
holders
and 3's units.
Snap all the cable
holders closed if you
haven't done that yet.
Attention
Do not pinch the wires.
Lower Feeder Units (Trays 3 and 4)
on Tray 2's
161